Ghost Immobiliser Fitting
Guard your car from theft of keys, cloning and hacking with the world's first aftermarket CAN immobiliser. With the added option of connecting to a Ghost app and GPS tracking system, which can send you call alerts when your car is altered with or stolen.
Installing a Ghost immobiliser is a breeze for a skilled technician. It is essential to have the appropriate tools and heat shrink tubing.
Getting Started
Unlike physical theft protection devices like wheel locks and car alarms, ghost immobilisers guard your vehicle without the need for LED indications or key fobs. Instead they connect directly to the ECU's CAN data network. They can only be activated by entering a PIN sequence. This provides a higher level of protection against key hacking, ECU swapping and cloning.
In the end, installing a ghost immobiliser Birmingham has to be done with a high degree of speed and accuracy. It's like walking through a minefield. A mistake could result in serious damage to the circuits of your vehicle. It is important to understand the procedure for installing and prepare your vehicle in a timely manner.
The first step is to prepare the vehicle by taking out interior panels to make space for the immobiliser device. Once you've found the perfect place to hide it and you have it, use cable ties to ensure it is secured. Then, tidy up the wiring by tying loose wires, and then using insulation tape or heat shrink tubing to cover exposed connections. This will help to reduce the risk of short circuits that are not intended to be there while also improving the aesthetics and decreasing the possibility of tampering with by thieves.
Then, locate a source of constant 12V power as well as an earthing point for the ghost immobiliser. Once you've found these and tested the power wires using a multimeter to ensure they are delivering a consistent voltage. Connect related resource site & the CAN L wires of your immobiliser to the grounding and power sources.
It is essential to double-check all the connections and check the immobiliser for indications of corrosion. It is also important to test the system to ensure it is working properly by entering a pin code and then starting the engine. This should be an integral part of your routine as it will help to spot any intermittent issues early on. Regular testing also helps to improve the longevity of the device and ensure that it is functioning at its best.
Preparing the Vehicle
The installation of the Ghost immobiliser is a complicated task that requires the right tools and knowledge. A wiring diagram of the vehicle is crucial for locating the correct wires and establishing precise connections. A multimeter can help verify the electrical properties and ensure security. Cable ties and insulation tape can be used to shield the connections from damage and to ensure they are secured. A user manual is available for your Ghost Immobiliser. It will provide you with specific instructions tailored to that model.
Once installed, a ghost immobiliser is able to stop an unauthorised engine from starting by requiring that the owner enter a unique PIN sequence by pressing buttons on the steering wheel or centre console. This can be accomplished manually or remotely using an app for mobile phones, and the code is able to be altered by the owner of the vehicle at any time. The device is also quiet and is undetectable by thieves because it doesn't emit radio frequencies.
Ghost immobilisers are directly connected to the CAN bus of the vehicle, a network which communicates with the electronic control units (ECUs) of the vehicle. It intercepts signals sent by ECUs, and blocks the engine if a false signal is identified. The system is weatherproof and tamper-proof. It has no LED indicators or keys to draw the attention of thieves.
It can be placed behind or in a less noticeable area to ensure that it isn't visible to thieves, and does not interfere with vehicle performance. It can be tucked away in a small container, so that it is less likely to be observed by unscrupulous salespeople during a test-drive.
Its stealthy operation, combined with its integration into the vehicle's CAN-bus system can be an effective deterrent to modern vehicle theft techniques such as signal relay attacks and key copying. The system can be integrated with other security measures to create a formidable barrier that can thwart even the most ardent thieves. This is why more and more insurance companies are now suggesting or even requiring ghost immobilisers be installed, as it can significantly reduce the cost of insurance.
Making Connections
Ghost immobilisers are quiet, unlike traditional security systems that can be heard by thieves. They prevent thieves from knowing that your vehicle is in operation. They also stop high tech methods of stealing vehicles, such as OBD hacking. Installing them without leaving permanent marks on your car is an ideal alternative for those planning to sell the vehicle in the near future.
The Autowatch Ghost 2 CANbus immobiliser is among the most recent and most reliable solutions to prevent car theft. It shuts down your engine by using the CAN data network and generates a unique PIN code, which is difficult for criminals to guess. It can be fitted in a variety of vehicles and is compatible with a variety of available features, including car alarms, GPS trackers and steering wheel locks and door lock bypass systems.
If you decide to go with an Ghost immobiliser, be sure to refer to the wiring diagram for your particular car model to identify the wires to connect. Make sure to double-check the location of these wires to ensure accuracy and mark them using labels or tape to aid in keeping track of them. It is also necessary to locate a constant power source (12V) for the system and a grounding. Once these are in place, you are able to begin making the connections to complete the installation.
The ghost immobiliser will not allow your vehicle to start unless the pin code is entered via the buttons on the dashboard or steering wheel. This will stop ECU hacking keys cloning, hacking, and other methods of theft from vehicles. It can also be used with other Thatcham approved security equipment like alarms or tyre clips to give your car an even higher security level.
As the UK automotive industry continues to grow as do the options available to secure your car. There are so many ways for thieves to gain access into your vehicle and steal it, so it's important to do everything you can to ensure that it isn't taken. This is why ghost immobilisers are an extremely popular option for responsible car owners.
Testing the System
The Ghost Immobiliser uses a CAN data network to communicate with the vehicle's ECU which stops the engine from starting until a specific PIN code is entered. This makes it extremely difficult for thieves copy your key fob to open your vehicle, and difficult to disable the system through hacking its electronics.
Ghost Immobilisers are also able to be utilized in conjunction with GPS tracking devices that will aid in tracking your vehicle and track it in the event of theft. This feature isn't typically found in security products that are sold aftermarket however it's an excellent way to improve the security of your vehicle and provide you with peace of mind.
The Ghost-II immobiliser offers not only enhanced security but also a pleasant experience for the user by eliminating the need to use additional key fobs or devices. It has an easy and intuitive PIN code entry system that integrates seamlessly into your everyday routine. It also has convenience features and deactivation modes that let you to temporarily disable the immobiliser to valet park or service your vehicle.
Before beginning the installation process, you should familiarize yourself with the vehicle's wiring and prepare the tools. A basic set of tools will allow you to create precise connections. A multimeter is a tool to test electrical values. Insulation tape and heat shrink tubing are also crucial to protect connections from short circuits, while cable tie can be used to secure the wiring in place. It is also essential to work in a well-lit area and wear the appropriate safety equipment when working with tools and electrical components.
After you've completed the installation you must test the Ghost immobiliser to make sure that it's functioning properly. The first step is to start the vehicle without entering the PIN code. If this doesn't work, you'll need to test the system again and conduct a more thorough inspection of the connections.
The Ghost Immobiliser, unlike other security systems is a covert device that cannot be detected by thieves. It is also far more effective than physical deterrents such as wheel clamps and steering locks. It is TASSA-approved and endorsed by some insurance companies. This makes it a cost-effective investment that provides you with the peace of heart you deserve.